Chain Wheel Selection Guide
Please print this page so you have a copy of the form below. Take a section of your chain, lay it out in a straight line, and measure the dimensions as shown below.
Please complete the table below the drawings with the dimensions and other information requested, and forward to Maxwell Marine Limited.
| P = pitch inside link | L = length outside the link | D = Chain wire diameter |
| W1 = width inside link | W2 = width outside the link | L1= inside dimension between 11 links |
| Customer Chain Specifications |
| Manufacturer/Supplier name |
|
| Chain standard/code |
|
| Chain type: Short link/stud link |
|
| Manufacturers specification if known |
|
| Material |
|
| Grade |
|
| Finish |
|
| |
| P - Pitch length inside link |
|
| L - Length outside the link |
|
| D - Chain wire diameter |
|
| W1 - width inside the link |
|
| W2 - width outside the link |
|
| L1 - inside dimension between 11 links |
|
Download the Maxwell Chainwheel Guide spreadsheet 
|
|
| | |
